Digital Intelligent Pyroelectric Infrared Motion Sensor P916 Infrared Human Sensor Passive Infrared Sensor PIR Detector

• Customization: Available
• Type: Sensor
• Usage: Anti-theft, Temperature, LED Light
• Model NO.: P916
• Installation Mode: Ceiling Mounted
• Certification: CE, RoHS
• Application: Home, Industry, Communication Electronic Products, Special Equipment
• Model: P916 PIR Sensor
• Input: 3V
• Output: Digital Sensor
• Pin: 3
• Transport Package: Stardard Package
• Specification: 6000pcs/carton
• Trademark: HW
• Origin: China
• Production Capacity: 1000000/Month

Product Description

1.Overview

P916 is a pyroelectric infrared sensor that integrates a digital intelligent control circuit and a human detection sensitive element in an electromagnetic shielding cover. The body detection sensing element couples the sensed human body movement signal to the digital intelligent integrated circuit chip through a very high impedance differential input circuit.

The digital intelligence IC converts the signal into a 15-bit ADC digital signal, which is timed when the PIR signal exceeds the selected digital threshold.
REL level output. The OEN enable enables the REL output or automatic control through the light sensor. Sensitivity and time parameters are set by resistors,Corresponding to the corresponding value, the voltage is converted into a digital threshold with 7-bit resolution. All signal processing is done on the chip.
 

2.Characteristic

Digital signal processing
Enable power regulation for more energy savings
Two-way differential very high impedance sensor input
A second-order Butterworth band-pass filter with built-in infrared sensors shields input interference from other frequencies
High power supply rejection ratio, anti-radio frequency interference
Sensitivity, timing, light sensor Schmitt REL output
LED sensor dynamic output port
Low voltage, low power consumption, instant work after startup
 

3.Application

toy
IoT sensor
Digital Frame
Sensor light
TV, fridge, air conditioning
Web video camera
USB alarm
PIR motion detection
Intrusion detection
Occupancy detection
Interior lights, corridors, buildings, private alarms
LAN Monitor
Car theft
 

1. Performance parameters

Maximum rated value
Any electrical stress exceeding the parameters in the table below may cause permanent damage to the device. Working under these maximum rated conditions may affect the reliability of the device.

Characteristics	Symbol	Min.	Max.	Unit	Remarks
		Value	Value
Supply Voltage	VDD	-0.3	3.6	V
Working	TST	-20	85	ºC
Temperature
Current into any pin	Into	-100	100	mA
Storage Temperature	TST	-40	125	ºC

Working conditions (T=25°C, VDD=3V, unless otherwise specified)
 

Characteristics

Symbol

Min.

Type

Max.

Unit

Remarks

Supply Voltage

VDD

2.7

3

3.3

V

Working Current

IDD

12

15

20

μA

Sensitivity

Vsens

120

μV

Non-adjustable

Threshold Value

Output REL

Output Low Current

IOL

10

mA

VOL<1V

Output High Current

IOH

-10

mA

VOH>(VDD-1V)

REL Low Level Output

TOL

2.3

s

Non-adjustable

Blockade Time

REL High Level Output

TOH

2.3

s

Delay Time

Oscillator & Filter

Low pass filter cut-off

7

Hz

frequency

High pass filter cut-off

0.44

Hz

frequency

 

1. Precautions

P916 is a pyroelectric infrared sensor that detects infrared changes. Detection of a heat source other than the human body or a change in the temperature and movement of the heat source may not be possible. Need to pay attention to the following general matters. Please be sure to check the performance and reliability with the actual usage status.
1) When detecting heat sources other than the human body
(1) When a small animal enters the detection range
(2) Far-infrared direct-irradiation sensors such as sunlight, car headlights, and incandescent lamps
(3) When the temperature in the detection range changes drastically due to the warm air of the cold-greenhouse equipment, cold air, and water vapor of the humidifier, etc.
2) When it is difficult to detect the heat source
(1) When there is a material such as glass or acrylic that is difficult to transmit far-infrared rays between the sensor and the detection object
(2) The heat source in the detection range is hardly actuated or moves at a high speed.
When the inspection area is enlarged
When the ambient temperature and the human body temperature are relatively large (approximately 20°C or more), even in the specified detection range
In addition, there are sometimes broad detection areas.
About other uses
1) If there is a stain on the window, it will affect the detection performance, so please pay attention.
2) The lens is made of soft material (polyethylene). If a load or impact is applied to the lens, it will cause malfunction and deterioration of performance due to deformation and damage. Therefore, avoid the above situation.
3) Damage may be caused when static electricity of ±200V or more is applied. Therefore, pay close attention to the operation and avoid touching the terminals with your hands.
4) In the case of soldering of the wire, solder the soldering iron to a temperature of 350°C or lower within 3 seconds. Soldering through solder baths may cause deterioration of performance, so please avoid them.
5) Please avoid cleaning the sensor. Otherwise, the cleaning solution intrudes into the lens and may cause deterioration of performance.