Hw-Xc202 Microwave Sensor Module 220V Input

• Type: Microwave Sensor Switch
• Principle: Motion Sensor
• Wires: NPN (Three-Wires)
• Standard: Standard
• Application: Warehouse
• Size: 120 Type
• Model NO.: HW-XC202
• Transport Package: Standard Package
• Specification: L63 X M58 X 45mm
• Trademark: HW
• Origin: China
• Production Capacity: 10000PCS/2weeks

Product Description

1. Product Overview:

HW-XC202 is the earliest AC load type microwave induction module introduced by our company. It has exquisite appearance, simple and compact product circuit structure, stable performance and cost-effective, high cost performance, especially suitable for intelligent appliances, security products, lighting Second development of products and other electronic fields. This product can be widely used in security monitoring, intelligent control systems, lighting appliances (garages, corridors, roads and other places).
2. Product working principle:
The HW-M21-2 microwave induction module uses a planar antenna to transmit and receive high-frequency electromagnetic waves based on the Doppler effect principle, and then detects a slight movement change in the return wave, and then triggers the microprocessor to work. Finally, the AC relay makes 220v / L conduction with AC load circuit to 220v / N.
3. Product Features:
Professional flat microstrip antenna design, field-shaped signal transmission and reception, wide coverage and high consistency, low power consumption, ROHS environmental protection, and strong anti-interference ability, not affected by temperature, humidity, airflow, dust, noise, light and dark.
When this product is used indoors, the sensing effect is better; when it is used outdoors, the sensing distance is slightly reduced or the sensitivity is slightly weak. This is a normal phenomenon, and users do not have to question the product.

1. Product Specifications: 

Model	HW-XC202	V.08version	5.8G Fixed frequency module
Input voltage VCC	AC-220V	AC Alternating current	Red-L, Black-N,
load	AC 250V/8A	10W-2000W AC load
output method	AC -L  ON/OFF	L-OUT /RelayL-sw	Yellow-AC L-K-OUT  Green-N
VDR	07D471
Induction method	Doppler motion detection (SENSOR installation is not movable)
Induction distance	SENS:Potentiometer adjustment	Remarkable distance (2m-10m)	customize
Induction Time	Time:Potentiometer adjustment	Remarkable time (2s-120s)	customize
Photosensitive adjustment	CDS:10lux	------------------	default
Trigger method	Repeatable trigger (default)	------------------	Non-repeatable triggering is not supported
Radiation frequency	5.8GHz±75MHz	Fixed frequency
Transmit power	<0.3W	-30dB
Angel	90°-360°	Angle is determined by space	SENS determines signal strength
Light sensor	Photoresistance	When receiving light, block OUT	Light sensor (default)
Operating temperature	-20~+80ºC		Ambient temperature
Dimensions	65mmx38mmx28mm	Please check the CAD	Length-width-height / mm
port	Red-L, Black-N, Yellow-OUT, Green-N	Cable Length 100mm	Please standardize the wiring

5.Induction time:
     Default repeatable trigger: If the trigger signal is triggered again for the first time, the module delay time will be superimposed again when the first trigger time is not stopped (such as: the module trigger time is 2S, and it will be accepted again within 2S) To the induction signal, superimpose 2S again, and there will always be an output signal when triggering continuously. Non-triggerable triggering: Induction triggers once and no time overlaps (such as: time 2s, trigger once, output 2s, within 2s) Regardless of multiple triggers are considered invalid, the time is not superimposed and maintained for 2s).