Type: | Probe |
---|---|
Usage: | Anti-theft |
Installation Mode: | Ceiling Mounted |
Samples: |
---|
Customization: |
---|
Shipping Cost:
Estimated freight per unit. |
about shipping cost and estimated delivery time. |
---|
Payment Method: | |
---|---|
Initial Payment Full Payment |
Currency: | US$ |
---|
Return&refunds: | You can apply for a refund up to 30 days after receipt of the products. |
---|
Suppliers with verified business licenses
ITEM | CONDITION | RATING |
6.1 Signal Output |
Black Body temperature: 420K Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
|
>3000mVp-p |
6.2 Noise Output |
Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
|
< 70mVp-p |
6.3 Balance output |
Black Body temperature: 420K Chopping Frequency: 1HZ, 0.3~ 3.5HZ △f
VA = A Element sensitivity (Vp-p) VB = B Element sensitivity (Vp-p) |
|VA-VB|/(VA+VB) ×100%≤10% |
6.4 Operating Voltage |
Single power supply RS=47KΩ | 2~15V |
6.5 Source Voltage | VD=5V,RS=47KΩ | 0.4~1.0V |
6.6 Circuit Configuration | See Fig.3 | |
6.7 Warm-up Time |
After it conneted, it with the measurement amplifier for Fig.3 description that turns on the power supply beforehand, the amplification output is time until stabilizing. | Max: 25 Sec |
ITEM | RATING |
7.1 Field of View | 113 degrees from center of Element on Axis X. |
90 degrees from center of Element on Axis Y. | |
See Fig 5 | |
7.2Response wavelength band | Filter substrate:Silicon Cut on wavelength:5.5±0.5μm Transmission:7~14μm ≥75% |
7.3 Transmission Characteristics of filter | See Fig 6 |
ITEM | RATING |
8.1Operating Tmeperature | -30~70 ºC |
8.2Storage Temperatur | -40~80 ººC |
8.3 Relative Humidity | The sensor shall operate without increase in Noise Output when exposed to 90 to 95% RH at 30ºC continuously |
8.4 Hermetic Seal |
No bubbles visible in the 125±5ºC fluorocarbon bath(FC-40) for 20sec |
8.5 Reliability Test | Specified in Appendix1( page13~14) |
Suppliers with verified business licenses