HW-MS01 Originals High Quality Cheap Microwave Motion Sensor Module
1.Detail
HW - MS01is our company newly developed MS series in a single PCB microwave sensor module.The product is particularly suited to ultra-thin design of intelligent household appliances, security products, lighting products and other electronics. This unique circuit structure design, function expansion, the strength of the strong compatibility and high cost performance advantages, is the leading the market advantage of the single panel module.
Built-in LDO functions: Set aside IC-7550/7533 of the application of bonding pad on the back of PCB, convenient transform DC3.7V ~ 24V and DC24V ~ 60V, which is easy to meet customers different requirements to order;
External distance and time adjusted function: easy to external application of secondary development, MCU is used to analyse the distance&time adjusted;
Two kinds of output modes: 1, the default output mode: on/cut, namely low level effectively. 2, customize output way: high level effective model (Vout≈Vcc).
Single PCB module,simplifies the making process, economize the make time and cost, and reduce the product of bad hidden trouble, improve the quality. so, the products have demonstrated the superior market competitiveness.
2.Technical Parameters
| NO. |
Items of parameter |
Specifications of parameter |
remarks |
| 01 |
P/S.input range |
24V ~ 60VDC;3.7V~24VDC(by custom) |
Custom-able |
| 02 |
operating voltage |
Vcc=+5.0V; Vcc=+3.3V(by custom) |
stabili-volt inside,Custom-able:Vcc=+5.0V or +3.3V |
| 03 |
operating current |
Static Iin≤7mA;Srends Iin≤8mA |
basic standard |
| 04 |
Output mode |
on/cut:Load≤5A/60V
Vout:H≈Vcc/L=0 |
Output mode:Custom-able |
| 03 |
Sensor distance |
Default:10m(indoor test) |
adjustable |
| 04 |
Delay-time for output |
Default:2sec. |
adjustable |
| 05 |
frequency range |
FT=2.5GHz-5.8GHz |
design by standards |
| 06 |
Outline size |
single-PCB:51X26mm |
PCB surface white oil |
Feature
No impact on temperature, humidity, airflow, dust, noise, light, dark and other factors because of its stronger anti-interference capacity.
Wide coverage without blind zone because of its field pattern emission.
The sensitive of the product indoor is better than outdoor's because the microwave is easier to reflect on the transmission
The signals can go through glass, door, wall and other obstacles.
Professional design of the microwave with flat antenna, low-power, ROSH and high product consistency.
Single board, small size.
Usage
The module is wildly used in security monitor, smart control system,illuminative light,power switch, garage, corridor, road, automatic door control system and other places.
Warm Note
1. Power
It is suggest that you should use qualified DC regulated power supply which the output voltage,current and ripple coefficient are standard. Otherwise, it could reduce stability like misreported,unreported, cycled auto start.
2. Misreported
1). Ensure qualified power. See note1
2). Ensure there isn't moving object around the tested products.
3). It doesn't detect and may cause misreported during starting up 10s-30s after electricity.
4).The sensitive is higher when testing indoor. Please keep quiescent state and test the second after finishing the first detected signal.Pay more attention to surroundings when testing the module outdoor.Like flying bird,walking man,running vehicle etc.
5).The output signal current of the module is too weak so that it may easier to make misreport when working high-powered device.
3.Time adjusting
There is time resistance on the back that you can adjust time.The higher resistance is,the longer time is.
4. Distance adjusting
There is distance resistance on the back that you can adjust distance.The higher resistance is,the longer distance is.
Notice: Circuit would become instability when the resistance is greater than 3 MΩ.It is kindly suggest that customers shouldn't adjust the resistance. Please contact us if needed.
5. Casing
The module should avoid installing into metal casing because it isn't easier to penetrate metal casing. The penetrating is better for plastic,china,wood and soil. Please see the standard after testing for specific case.
About Us
Shenzhen Haiwang Sensor Co.,Ltd is high-tech enterprise that focuses on research and development, production, sales and services. We have dedicated PIR motion and microwave for more than ten years.
The products we offer cover all kinds of sensor component, sensitive electrical component and smart electrical component. Such as PIR motion sensor and matched IC, fresnel lens,PIR motion module,video player and so on. We also provide technical support,OEM &OED upon products. Our products are wildly used in illuminative lights, public security monitory,advertisement medium and traffic security device.
Please confirm our brand
Audited Supplier 
){kind=link}