Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application

Function Type: Infrared Range and Communication System
Detection Type: Heat Detectors
Output Signal Type: Digital Type
Production Process: SemiConductor Integrated
Material: Si+ Matel
IP Rating: IP20
Samples:
US$ 2/Piece 1 Piece(Min.Order)
| Request Sample
Customization:

Contact Supplier

Ms. Cindy Wangwang
Sales Manager
Gold Member Since 2016

Suppliers with verified business licenses

Trading Company

Basic Info.

Model NO.
RE46B
Certification
CE
Customized
Customized
Model
Re46b
Operating Voltage
3-10V DC
Filter Substrate
Silicon
Window Size
4.9*4.9mm
Source Voltage
0.35~1.4V
Cut on (5% Tabs)
5+-0.5um
Operating Temp
-30-70 Degree
Transmittance
≥70%
Storage Temperature
-40--+80 Degress
Encapsulation Type
to-5
Transport Package
Tray
Specification
CE, RoHs
Trademark
HW
Origin
Guangdong, China
HS Code
9031499090
Production Capacity
100, 000, 000

Product Description

Pyroelectric Infrared Detector Sensor RE46B
NICERA Sensor RE46B use CCTV monitoring, automation equipment and alarm application
Electrical characteristics 
1) Element Geometry : Four sensitive areas 1.0mm*1.0mm and spaced 1.0mm apart
2) Operating voltage : 3 ~ 10 V dc (Rs: 47kohm)
3) Element polarity : Element A,C:(+) B,D:(-) or A,C:(-) B,D:(+)
4) Source voltage : 0.35 ~ 1.4 V (Vd: 5V, Rs: 47kohm)
5) Signal output : Min. 4.0 Vp-p (Typ. 5.5 Vp-p)
(S1, S2)
Signal output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
6) Noise output : Max. 200 mVp-p (Typ. 110 mVp-p)
Noise output shall be measured for 20 seconds when connected to the amplifier of gain 72.5 dB (at 1 Hz) and shut out from Infrared energy.
7) Balance output : Max. 15 %
[|S1-S2| / |S1+S2|]<= 0.15
S1 : Signal output on Element A + C
S2 : Signal output on Element B + D
Balance output is measured at chopper frequency of 1 Hz when connected to the amplifier of gain 72.5 dB (at 1 Hz) and submitted to the emission of Infrared energy of 13 microW/cm2 from 420 K Black Body.
8) Frequency response : 0.3 Hz to 3.0 Hz / (+/-) 10 dB
 
Optical characteristics
1) Field of view : 132° from center of element on axis X,Y
: 146° from center of element on 45°
2) Filter substrate : Silicon
3) Cut on (5 %T ABS) : 5.5 (+/-) 0.5 micron
4) Transmission : >=70 % average 7 to 14 micron
 
Environmental requirements
1) Operating temperature : -30 degC to +70 degC
2) Storage temperature : -40 degC to +80 degC
3) Relative humidity : The sensor shall operate without increase in noise output when exposed to 90 ~ 95 % RH at 30 degC continuously.
4) Hermetic seal : The sensor shall be sealed to withstand a vacuum of 21.28 kPa.
 
RoHS compliance
This product conforms to the RoHS Directive in force at the date of issuance of this Specification Sheet.
Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application
Working Principle 

Pyroelectric infrared sensor would change charge when radiant energy changes. The effect can be used in detecting the change of infrared radiant.The sensors apply to human motion detector,passive infrared burglar alarm and automatic light switch. Based on the same theory, the pyroelectric infrared sensor applies to gas detection with infrared absorption.

Typical  Application 
1. Passive infrared burglar alarm: strong anti-interference for strong with light and electromagnetic radiation
2. Human motion detector 
3. Human motion detector of ceiling 
4. Gas analysis
5. Non-contact infrared measurement 

Picture Show
Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application

PIR Sensor Series for your choice:
Nicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm ApplicationNicera Sensor Re46b Use CCTV Monitoring, Automation Equipment and Alarm Application

Our Service
1.OEM and ODM are welcome.
2.Small quantity order is welcome.
3.Sample lead time: 1-3 days
4. Your inquiry for our products will be replied in 10 hours.

About Haiwang
Shenzhen Haiwang Sensor Co., Ltd is specialized in developing, manufacturing and export of photo resistor, thermisters, sensors, optical lenses and other sensitive components.
Our products include photoresistance, photosensitive sensor, thermistor, pyroelectric infrared sensor,
infrared induction IC, fresnel lens, LED lens, Personal Alarm and other related sensitive components.

Send your message to this supplier

*From:
*To:
avatar Ms. Cindy Wangwang
*Message:

Enter between 20 to 4,000 characters.

This is not what you are looking for? Post a Sourcing Request Now

You Might Also Like

Product Groups

Contact Supplier

Ms. Cindy Wangwang
Sales Manager
Gold Member Since 2016

Suppliers with verified business licenses

Trading Company
Number of Employees
17
Year of Establishment
2004-08-19